Coming soon
ink cartridge cleaning instructions – pdf
Postage Indicia only prints on half – pdf
PostBase customer Withdraw – pdf
Enabling Decimal Mode
This allows the PostBase to post the new 3-decimal $0.485 meter rate.
1. Press MENU on PostBase HOME SCREEN.
2. Scroll left or right to get to Decimal Meter Mode and press that button.
3. Select $0.000 and press SAVE.
Coming Soon
Error Codes
| Error Code | Text | Resolution |
| 00130000 | Teleporto Necessary | You must run Teleset at least every 90 days. Load zero dollars at that time if you don’t wish to download postage. |
| 0031000D | Ink empty | Replace both ink cartridges. |
| 00140001 | Connectivity error | Check that network cable is working and connected properly.Tap menu. Verify that network information was entered correctly.Check if a network firewall is blocking transmissions (talk with your network administrator). |
| 0D02000F | Connection failed | Check that network cable is working and connected properly.Tap menu. Verify that network information was entered correctly.Check if a network firewall is blocking transmissions (talk with your network administrator). |
| 000A000D | Letter feed error | Check the base unit for envelope or label jam:Power off.Remove drawer and inspect for jam.If no jam, use canned air to clean off the entire letter feed path and sensors. |
| 0D020001 | Failure in communication with data center | This usually means that your account has insufficient funds. Replenish your postage account by logging into the FP customer portal. |
| 000F0000 or 0002 | Cp error not available | Remove ink cartridges.Clean all contacts in each cartridge.Re-insert cartridges.If error persist, perform a zero-dollar download and call FP to check your “piece count”. |
| Main battery almost empty | Check the main battery on the bottom of the base unit:Turn off unit.Unplug from power.Remove main battery.Check that the battery is inserted correctly (“+” to “+”).Replace the battery with a 3.6V lithium battery if necessary.
Do not use standard AA (1.9V) batteries in your PostBase. Although they look the same as the PostBase battery, they may damage your machine.
|
All of the available error codes for PostBase.
FP Meter Users Will See a Price Decrease with the January 22, 2017 Rate Change
PostBase mini rates are now available
Disclaimer: The following information does not apply to PostBase Mini customers. If you are a PostBase Mini customer, or you do not use the PostBase Manual Postage feature, please disregard the following message.
FP has identified an issue with the latest rate change download that affects the use of the Manual Postage feature on your PostBase machine. To use the Manual Postage feature, PostBase customers will need to re-download the rate change update via Remote Service.
How to Update Rates (written instructions)
Update your PostBase rates using an Ethernet connection.
Update your PostBase rates using Remote Service.
For any other questions, please reference the PostBase Operators Manual.
“The connection test failed” error
The network and computer system that serves PostBase may become overloaded during rate change, resulting in a “connection test failed” error and an error code similar to 0D020006.
The error means that the PostBase “tested” the network and was unable to complete the connection to FP servers.
If this happens, do NOT attempt to download postage again. Your meter will temporarily be prevented from downloading. Contact Customer Service at 800-341-6052.
When to Update Your Rates
When FP makes the rate update available to customers, you may update your rates, even if it’s prior to the USPS effective date. Rates are stored in your machine and automatically activate on the effective date.
MailOne 2.0 Software
If you use MailOne 2.0 software with your PostBase, you must update your postal rates via the software in addition to the PostBase machine. (MailOne will not run unless both the machine and software have updated to the same rate tables.)
Verify the Update
PostBase Machine
If your rate update was successful, your equipment will activate the new rates on the effective date. You can verify that the update was successful by checking your equipment’s rate table version number on or after the effective date.
Note: There is no confirmation screen screen prompt stating that the rate table has been downloaded.
RATE TABLE VERSIONS:
January 22, 2017 – 1.0/09.01
August 28, 2016 – 1.0/08.07
April 10, 2016 – 1.0/08.00
January 17, 2016 – 1.0/07.00
May 31, 2015 – 1.0/06.00
September 7, 2014 – 1.0/05.00
January 26, 2014 – 1.0/04.00
To verify that your new rates have been successfully applied, follow the instructions in PostBase Addendum to Operators Manual (PDF).
External Scale
If you use an external scale to calculate postage, see External Scales Postal Rate Updates for instructions on updating your scale’s rates in addition to the PostBase machine.
Memories & Shortcuts
After the effective date of the new postage rates, you may need to manually update any programmed memories to the new rates. The memories will not automatically update.
If you need additional help updating rates with FP Mailing equipment, contact FP Customer Service at 800-341-6052, or email custserv@fp-usa.com.
- + Install
-
Coming soon
- + WiFi adapter installation
- + Self help
-
ink cartridge cleaning instructions – pdf
Postage Indicia only prints on half – pdf
PostBase customer Withdraw – pdf
Enabling Decimal Mode
This allows the PostBase to post the new 3-decimal $0.485 meter rate.
1. Press MENU on PostBase HOME SCREEN.
2. Scroll left or right to get to Decimal Meter Mode and press that button.
3. Select $0.000 and press SAVE. - + Documents and manuals
-
Coming Soon
- + Error codes
-
Error Codes
Error Code Text Resolution 00130000 Teleporto Necessary You must run Teleset at least every 90 days. Load zero dollars at that time if you don’t wish to download postage. 0031000D Ink empty Replace both ink cartridges. 00140001 Connectivity error Check that network cable is working and connected properly.Tap menu. Verify that network information was entered correctly.Check if a network firewall is blocking transmissions (talk with your network administrator). 0D02000F Connection failed Check that network cable is working and connected properly.Tap menu. Verify that network information was entered correctly.Check if a network firewall is blocking transmissions (talk with your network administrator). 000A000D Letter feed error Check the base unit for envelope or label jam:Power off.Remove drawer and inspect for jam.If no jam, use canned air to clean off the entire letter feed path and sensors. 0D020001 Failure in communication with data center This usually means that your account has insufficient funds. Replenish your postage account by logging into the FP customer portal. 000F0000 or 0002 Cp error not available Remove ink cartridges.Clean all contacts in each cartridge.Re-insert cartridges.If error persist, perform a zero-dollar download and call FP to check your “piece count”. Main battery almost empty Check the main battery on the bottom of the base unit:Turn off unit.Unplug from power.Remove main battery.Check that the battery is inserted correctly (“+” to “+”).Replace the battery with a 3.6V lithium battery if necessary. Do not use standard AA (1.9V) batteries in your PostBase. Although they look the same as the PostBase battery, they may damage your machine.All of the available error codes for PostBase.
- + Rate Change
-
FP Meter Users Will See a Price Decrease with the January 22, 2017 Rate Change
PostBase mini rates are now available
Disclaimer: The following information does not apply to PostBase Mini customers. If you are a PostBase Mini customer, or you do not use the PostBase Manual Postage feature, please disregard the following message.
FP has identified an issue with the latest rate change download that affects the use of the Manual Postage feature on your PostBase machine. To use the Manual Postage feature, PostBase customers will need to re-download the rate change update via Remote Service.
How to Update Rates (written instructions)
Update your PostBase rates using an Ethernet connection.
Update your PostBase rates using Remote Service.
For any other questions, please reference the PostBase Operators Manual.
“The connection test failed” error
The network and computer system that serves PostBase may become overloaded during rate change, resulting in a “connection test failed” error and an error code similar to 0D020006.The error means that the PostBase “tested” the network and was unable to complete the connection to FP servers.
If this happens, do NOT attempt to download postage again. Your meter will temporarily be prevented from downloading. Contact Customer Service at 800-341-6052.
When to Update Your Rates
When FP makes the rate update available to customers, you may update your rates, even if it’s prior to the USPS effective date. Rates are stored in your machine and automatically activate on the effective date.
MailOne 2.0 Software
If you use MailOne 2.0 software with your PostBase, you must update your postal rates via the software in addition to the PostBase machine. (MailOne will not run unless both the machine and software have updated to the same rate tables.)
Verify the Update
PostBase Machine
If your rate update was successful, your equipment will activate the new rates on the effective date. You can verify that the update was successful by checking your equipment’s rate table version number on or after the effective date.
Note: There is no confirmation screen screen prompt stating that the rate table has been downloaded.
RATE TABLE VERSIONS:
January 22, 2017 – 1.0/09.01
August 28, 2016 – 1.0/08.07
April 10, 2016 – 1.0/08.00
January 17, 2016 – 1.0/07.00
May 31, 2015 – 1.0/06.00
September 7, 2014 – 1.0/05.00
January 26, 2014 – 1.0/04.00To verify that your new rates have been successfully applied, follow the instructions in PostBase Addendum to Operators Manual (PDF).
External Scale
If you use an external scale to calculate postage, see External Scales Postal Rate Updates for instructions on updating your scale’s rates in addition to the PostBase machine.
Memories & Shortcuts
After the effective date of the new postage rates, you may need to manually update any programmed memories to the new rates. The memories will not automatically update.
If you need additional help updating rates with FP Mailing equipment, contact FP Customer Service at 800-341-6052, or email custserv@fp-usa.com.